Industrial-grade performance. Reliable and repeatable results.
Ultimaker Factor 4 OrderMore informationWhat sets the Ultimaker Factor 4 appart
Built for the factory floor
The seamless, powerful upgrade that your production workflows demand.
Reliability, repeatability and validation
High quality results. Every time. Anywhere.
Betrouwbaarheid, consistentie en validatie
Consistente hoge kwaliteit. Altijd. Overal.
Achieve more with FDM 3D printing
Direct drive extrusion for flexible materials.
A future-proof investment
Versatility and quality that translates to fast ROI.
Application and material-matching print cores
| UltiMaker print cores feature a quick-swap design and EEPROM chip. They are recognized by Cura and can be quickly changed without tools to meet the requirements of any print job, increasing your efficiency and decreasing downtime. Factor 4 is compatible with all UltiMaker print cores: AA, BB, CC, DD, and HT. |  |
Built for the factory floor
The seamless, powerful upgrade that your production workflows demand.
Ultimaker Factor 4 elevates manufacturing with its triple-insulated build chamber and direct dual extrusion. The automated material handling system maintains filament quality. And the robust, temperature-controlled design ensures consistent production output also on complex and challenging designs.
Reliability, repeatability and validation
High quality results. Every time. Anywhere.
Achieve the highest print accuracy of any UltiMaker printer – even at high resolution on small design features. These will achieve a dimensional accuracy of ± 0.2 mm + ± 0.2% of feature nominal length over the full build plate and across multiple printers.*
Achieve more with FDM 3D printing
Direct drive extrusion for flexible materials
The Ultimaker Factor 4 excels at quickly switching from 3D printing highly flexible materials all the way to strong composites, like UltiMaker PPS CF. Its H-bridge gantry and direct drive head enable rapid dual material printing.
High quality.
Every time.
Anywhere.
Success with every 3D print.
Ultimaker Factor 4 makes it possible to additively produce & deploy structural integrity verified parts across different locations. The low variance, less than 10%, in extrusion rate and mechanical properties batch after batch, part after part is a combination of the H-bridge gantry, closed loop feed control, and uniformly controlled build plate temperatures – with a maximum variation of 2 °C across the X and Y axes.
Actively temperature controlled build volume up to:
70 °C
heated bed up to:
120 °C
A future-proof investment
Versatility and quality that translates to fast ROI
Regular updates ensure that your Factor 4 will evolve over time – far beyond the 12 to 18 months it will take to achieve return on investment. The 3D printer’s modular build allows our global support network to quickly replace parts, minimizing downtime.
Built on more than 13 years of UltiMaker legacy – dedicated to innovation, accessibility, and openness.
Integrated HEPA filter
Independently tested to remove up to 95% of ultrafine particles to increase air quality peace of mind. The fully enclosed build chamber also boosts print quality.
Onboard structural integrity validation
After every print job, receive an in-depth report on extrusion parameters deviations from nominal values, their locations, and their severity in the 3D model.
Automated material handling with low humidity storage
Automatic pre-loading and spool switching (up to 6) with RH < 15% on any external conditions.
Emergency stop button
A conspicuous red STOP button ensures easy and safe operation should there be a need to immediately halt printing.
7-inch capacitive touchscreen
Mounted higher to give a better view of the first layers when remote monitoring. Monitor your print in high resolution remotely via UltiMaker Digital Factory.
H-bridge Gantry
H-bridge gantry and direct drive head enable rapid dual material printing. Ultimaker Factor 4 is capable of reaching up to 340°C on its print cores, 70 °C on the print chamber and 120 °C on its heated bed.
Always up to date
With dual onboard processors, there is plenty of computing headroom for planned and even unplanned future updates.
Featured accessories and materials
UltiMaker PPS Carbon Fiber
The new UltiMaker PPS CF allows you to use this high-temperature composite to replace less-demanding complex steel parts and manufacturing aids with an excellent surface finish.
UltiMaker HT print core
Ultimaker Factor 4 raises the temperature up to 340 °C using the HT print core. This means that you can now 3D print higher temperature-resistant and durable materials with more confidence.
Ultimaker Factor 4 Printer station
Tailor-made for Ultimaker Factor 4. Anti-tilting architecture and stability, Lock in mechanisms to fix 3D printer to cabinet
